Having a flat tire is a significant inconvenience. When you don’t have a spare tire, you can either fix the tire on your own or call a tow company. The process of fixing a flat tire is easy. You need a lug wrench and a jack to fix the tire. Consider using a hydraulic floor jack to improve strength.
If you don’t have a spare tire, you need a repair kit that contains an air compressor, probe tool, tire plugs, and pliers. You can also use an inflator to get to the closest tire shop. Car owners usually remove the penetrated tire. Then, they will replace it with a replacement, allowing them to travel to a repair shop to ask for a replacement.
What if the tire is not severely damaged and you don’t have a spare tire? If you have a patch kit and the right tools and the hole in the tire is not that big, you can fix the tire on your own. However, take note that this solution is only short-term.
That’s mainly because a patched tire is safe to use for around 3 days. You can also use it for at least one hundred miles. Using a spare tire won’t solve the problem either. The best solution to a punctured tire is to get it adequately replaced.
Plug a Punctured Tire
Before you fix the tire, make sure you have everything you need. Are you now considering to fix your flat tire during fog or at night? Then it’s vital that you have to wear a reflector vest, allowing you to improve your road visibility. It’s also important to place triangle hazard signs to notify others about your situation. Place one hazard sign 5 meters in front of your car and another hazard sign 5 meters behind your vehicle.
Take out the flat tire
Pop off the flat tire. Loosen the lug nuts with the help of atta lug wrench. Don’t remove the lug nuts from the bolts yet. Attach the jack to the right jacking area. The parking brake should be engaged, and your car should be in gear to prevent the vehicle from rolling. Make sure you’re on level ground while fixing the tire. Jacking a car on a slope can be dangerous. Once your vehicle is jacked up, take off the lug nuts and remove the tire.
Locate the hole and plug it
Pull the object that punctured the car tire. If you don’t have any idea about the location of the leak, you can inflate the tire and listen or feel around the tire surface for escaping air or opening. You can also spray the inflated tire with soapy water. Bubbles will quickly form at the puncture point. Ream the hole out to ensure that the plug will fit. Adhesives are usually included in a patch kit. Insert the adhesive into the hole until almost 2” of the adhesive is protruding from the tire. Allow the adhesive to dry and remove the bulging excess of the adhesive before throwing it away.
Check the plug’s seal
You can test the plug by expanding the tire. Make sure you listen over the tire to see if there’s evading air. Another way to test the plug is by spraying the tire with soapy water.
Reattach the wheel
Reattach the lug nuts and tire. Tighten the lug nuts just enough to keep the tire in place. Don’t forget to lower your vehicle into the surface, taking out your jack. Tighten the lug nuts in an X or star pattern if you have a 4-bolt model. Don’t forget to read the car’s torque requests. If completed appropriately, you can go to a shop to get a proper tire replacement.
Replace a Flat Tire
If you have a spare tire, you can replace the flat one on your own. Here’s how you can do it.
Take out the flat tire
Before you raise the car with a jack, loosen the lug nuts on the tire with a lug wrench. Don’t remove the nuts yet. Fasten the jack to the right jacking point, raising the side of the vehicle you are completing. Ensure you perform that on a level surface. Once the car is jacked up, remove the nuts and pop off the flat tire.
Attach the spare tire
The spare wheel should have a similar type of tire. This must similar to the one you are working on. After all, you don’t want to drive with 1 summer tire and 3 snow tires. Attach the nuts to the bolts, but don’t tighten them completely. Lower the jack until your car’s full weight is placed on the tire.
Take out the jack and then tighten the nuts in an X or star pattern. You can drive the car again, but you need to be careful because spare tires are not made to be used for very long. Don’t exceed 50 mph when you’re driving with a spare tire. Go to a repair shop to get a suitable tire placement. You may also want to get the tires rotated while your car is in the shop.,
Will it Take a Long Time to Fix the Tire?
It depends on the extent of car tire damage, your experience in repairing flat tires, and the availability of the tools you need. If you have fixed a few car tires before, it means that you know how to utilize a wheel spanner and jack. These tools can be purchased from auto mechanic shops and gas stations.
Fixing a car tire takes less than 5 minutes as you only need to replace the flat tire with a spare. Slow punctures and defective tire valves need more time as you have to go to a mechanic to get your car fixed because they have the tools and experience fix tires.
If you already have the required tools and a spare tire, you will not pay anything. That is why you should always travel with a fully loaded toolbox and a spare tire. The prices of tires depend on what brand your car uses. If you want to call a car mechanic, you have to pay his labor fees as well.